Share to:

Gasket

Keywords: carbon Gasket,stainless gasket,steel Gasket,flat Gasket,Aluminum Gaskets
Temperature: -60~300°C
Hardness: 40~80 shore A
Tensile strength: More than 5.0 Mpa
Material: Stainless Steel, Graphite, Mica, Non Asbestos
Delivery: Within 30 days and Depends on your order quantity
Payment: TT, LC , OA , D/P
Packing: Packed in Wood Cabins/Wood Tray
Application: rail cars, automobile, steamboat,industrial electrical equipment, building door & window, construction machinery, construction bridge and tunnel. Etc.

In piping, a Gasket is sealing material placed between connecting flanges to create a static seal, which will maintain the leakage proof sealing in all operating conditions. Different types of gaskets are used to achieve the leak proof sealing between the pipe flange. The primary function of gaskets is to seal the irregularities of each face of the flange so that there will be no leakage of the service fluid from the flange joint.

Types of Gaskets to be used in given fluid service is depends on the parameters such as

Temperature – Gasket material must withstand entire design temperature range of the fluid it handles.

Pressure – Gasket material must withstand entire design pressure range of the fluid it handles.

Corrosion resistance – Gasket material should not corrode when it comes in contact with the fluid it handles or by the environmental exposure.

Types of fluid – Gasket material should be capable of dealing with different type of fluids if installed in line that handles more than one types of fluids.

Robustness – The gasket must be capable of withstanding all movement that may occur due to change in temperature and pressure.

Availability – Gasket should be easily

Cost – Cheap and unreliable gasket should not be used at the same time it should not be costly.


Selection of Gasket

Proper selection of gasket depends upon following factors.

Compatibility of the gasket material with the fluid.

Ability to withstand the pressure-temperature of the system.

The service life of the gasket

It is important to understand the requirements of particular applications before making gasket selection. Gaskets must maintain a seal for an acceptable period against all the operational forces involved. There are eight important properties which any gasket must possess to achieve this –

Impermeability – The gasket should not be porous to the fluid being sealed.

Compressibility – The gasket should compress into the imperfections on the flange sealing faces to create the initial seal.


Stress relaxation (creep resistance) – The gasket should not show significant flow (creep) when subjected to load and temperature. Such flow will allow the bolts to relax, reduce gasket surface stress and cause leakage.

Resilience – Although normally stable, flanges do in fact move slightly relative to one another under the influence of cycling temperature and pressure. The gasket should be capable of compensating for such movements.

Chemical resistance – The gasket should withstand chemical attack from the process medium being handled. Likewise, the gasket material itself must not contaminate the process medium.

Temperature resistance – The gasket should be able to withstand the effects of the maximum and minimum temperatures within the process and the external atmospheric temperatures.

Anti-stick – The gasket has to be easily removable after use.

Anti-corrosion – The gasket must not cause corrosion of the flange faces.


Types of Gaskets

There are three types of gaskets used in process piping.

Non-Metallic

Metallic

Composite

Non-MetallicMetallic Ring GasketComposite
Compressed Non-Asbestos Fiber Gasket (CNAF)Oval Ring GasketSpiral Wound Gaskets
PTPE GasketOctagonal Ring GasketComprofile Gaskets
Rubber Gasket Metal Jacketed Gasket


All materials are treated with an anti-stick coating on both sides to better protect the gasket and the machine itself.

MaterialGasket TypeMaterialApplicationMaximum Short Duration Temperatures
NCA-45Cork GasketCork/synthetic rubber blendMedium Oil resistance of most Sealing application:
p Valve Covers
p Oil Pans
p Transmission Pans
up to 200°C (392°F)
CMP-4000Paper GasketCompressed MicroPore material, combining a unique synthetic fiber matrix and fully cured Nitrile Butadiene rubber binderExcellent ability and torque retention properties for OEM and Industrial Applications.up to 350°C (650°F)
HFL-171Paper GasketFully cured Nitrile Butadiene rubber binderHeavy-duty and Industrial Applica- tion:
p Diesel engine p Transmission p Refrigeration p Piping
up to 290°C (550°F)
HFL-781Paper GasketControlled swell gasket mate- rial with Styrene Butadiene and natural rubber bindersHeavy-duty oil sealing Application:
p Diesel engine
p Oil pans
p Front covers
up to 290°C (550°F)
M5201Paper GasketHigh-density material with fully cured Nitrile Butadiene rubber binderHeavy-duty Diesel engine Application:
p Oil resistance
p Fuel resistance
up to 290°C (550°F)
MP-15Paper GasketMicroPore with a Nitrile Butadi- ene binderExcellent low flange pressure ability and bolt torque retention for heavy-duty applications:
p Compressors
p Diesel engines
p Others
up to 205°C (400°F)
N-8092Paper GasketReinforced Cellulose with Nitrile binderExcellent crush resistance at high flange pressure for Diesel Engines and Compressor Applications:
p Oil p Fuel p Water
up to 180°C (350°F)
PF-4SPaper GasketSynthetic fibers, advanced fill- ers and Nitrile Butadiene bind- ersVarious Oil, Air, and Coolant Application:
p Oil pans
p Front covers
p Intake manifolds
p Rear seals
up to 290°C (550°F)


MaterialGasket TypeMaterialApplicationMaximum Short Duration Temperatures
RN8011PaperGasketLow density Cellulose fiber ma- terial with high rubber filler content and Nitrile Butadiene rubber binderExcellent sealing at low flange pressures for Oil and Water Appli- cations:
p Engine
p Transmission pan gaskets
p Water pumps
p Environmental seals
up to 180°C (350°F)
S-8091PaperGasketLatent cure Styrene Butadiene bound material with reinforced Cellulose fiberExcellent sealing for:
p Oil
p Fuel
p Low-pressure Steam
up to 180°C (350°F)
TS-9016PaperGasketFully cured Styrene Butadiene rubber binder and a blend of Ar- amid and Cellulose fibersOil and Water Applicationsup to 290°C (550°F)
VB-72PaperGasketMicroPore with a Nitrile Butadi- ene binderHeavy-duty applications:
p Valve body
p Applications with high fluid pressures and flow rates exposure p Erosion Resistance
up to 290°C (550°F)
EMC-7201MetalGasketComposite structure of high- density, fully cured Nitrile Butadiene bound gasket facings chemically and mechanically fused to an expanded steel coreHigh performance Diesel engine structural joint applications: p Gear case
p Flywheel housings
p High pressure hydraulic joints

HTX-900 7%MetalGasketGraphite-coated, high tempera- ture facing material chemically and mechanically fused to an expanded steel coreHigh strenght, thermal integrity, and anti-stick performance sealing applications: p Exhaust manifolds p Header
p Collector
p EGR system gaskets

ML6MetalGasketNon-asbestos Cellulose fiber combined with Nitrile latex and thermosetting resinsHigh Performance, non-extruding metal support sealing application: Intake manifolds Transmission Braking system Industrial Applicationup to 205°C (400°F)



Blacking,polishing,anodize,chrome plating,zinc plating,nickel plating,tinting etc.


Product Inquiry

Shanghai Beall Metal Co.,Limited

Over 25 years of steel experience, we offer a full size range and vary standard of steel pipe, OCTG&line pipe, pipe fittings and flange, valve and gasket, bolts and nuts and scaffolding products for projects around the world.

SUBSCRIBE TO OUR PRICE LIST

Please leave us product type, size, standard, quantity and necessary details for latest price. Our sales team will contact you within 24 hours.

CONTACT US

  No.1088 XinJinQiao Road,Shanghai,China
 +86 21 60530355, 60530655
    +86 21 60488433, 60488477
Copyright © Shanghai Beall Metal Co.,Limited All Rights Reserved.