Home » Products » Steel Pipe » Galvanized Steel Pipe
Share to:

Galvanized Steel Pipe

Keywords: carbon steel pipe,Electric Resistance Welded Steel Pipe, Round Pipe,Square Pipe,Rectangular Pipe
Size: OD: 21.3mm ~ 610mm;WT: 0.5mm ~ 20mm;LENGTH: 0.3mtr ~ 18mtr, Ramdon Length, Fixed Length, SRL, DRL
Standard & Grade: GB/T 3091 Q195/Q215/Q235/Q345, BS 1387, EN 39, EN 1139 S235JR/S275JR, ASTM A53 GR. A/B/C, JIS G3444 STK 400/STK 500
Ends: Square Cut/Threaded, Burr Removed
Delivery: Within 30 days and Depends on your order quantity
Payment: TT, LC , OA , D/P
Packing: Steel Strips bundled, Plastic Caps plugged, Waterproof Paper wrapped etc
Usage: Used for transporting low pressure liquid, gas and heating

Galvanized seamless pipe is divided into cold-plated steel seamless pipe and hot dip seamless pipe.


Hot dip seamless pipe

The seamless pipe is to make the molten metal and iron substrate reaction, the alloy layer, so that the substrate and coating combination of both. Hot-dip galvanizing is the first steel pickling, in order to remove the steel pipe surface of iron oxide, pickling, aqueous solution of ammonium chloride or zinc chloride or ammonium chloride and zinc chloride mixed aqueous solution tank cleaning, and then send into the hot dip tank. Hot dip galvanized coating uniformity, strong adhesion, and long life.


Cold-plated seamless pipe

Cold galvanized, electric-galvanized, galvanized the amount of small, only 10-50g/m2 of its own resistance to corrosion than hot dip galvanized pipe a lot of difference. Regular galvanized pipe manufacturers, in order to ensure the quality, most do not use electric-galvanized (cold-plated). Only those small-scale, outdated equipment and small businesses with electric galvanized, of course, their prices are relatively cheap. The Ministry of Construction has formally below, cold galvanized pipe to eliminate backward technology, the future not be allowed to cold galvanized pipe for water, gas pipes.


Galvanized seamless mechanical properties

The mechanical properties of steel is to ensure that an important indicator of the steel end-use properties (mechanical properties), it depends on the chemical composition and heat treatment of steel. Steel standards, according to different requirements, the provisions of the tensile properties (tensile strength, yield strength or yield point elongation) and hardness, toughness, user requirements, high and low temperature performance.


Application:

Building and structural material

.Mechanical and general engineering purposes

Manufacturing of Bus Body, Railway Boogies

In Telephone department as Conduit Pipes

Material Inspection (Steel Pipe) — Hanging — Degreasing — Rinsing — Pickling — Washing — Dipping Fluxing — Hot Air Drying — Inside and Outside Hot-dipped Galvanizing Blow

— Cooling — Passive and Rising — Unloading — Inspection and Trimming — Type Identification — Packaging and Storing and Transportation


Types: Galvanized welded steel pipe, galvanized seamless steel pipe
Materials: Carbon steel
Connection type: threaded
Size range:1/8″-36″
Schedule: sch40, sch80, sch120, sch160, XH, XXH

 

Length of the galvanized tubes
- in diameter 4 – 16 mm 6000 + 100 mm
- in diameter 18 – 42 mm 6000 + 50 mm


Tolerances of the zinc coated tubes
- tolerances of the outside diameter:
- diameter between 4 – 30 mm ±0,08 mm
- diameter between 35 – 38 mm ±0,15 mm
- diameter up to 42 mm ±0,20 mm
- tolerances of the inside diameter are according to EN 10305-4
- tolerance of the wall thickness ± 10%

The Steel grades for the zinc coated tubes
E 235+N and E 355+N



Surface condition of the galvanized tubes
First layer –electrically leached zinc (Zn) – acts as anode and in a corrosive environment it corrodes first and the base metal is cathadically protected against corrosion. The zinc layer thickness may be in the range of 5 to 30 micrometers (µm).


Product Inquiry

Shanghai Beall Metal Co.,Limited

Over 25 years of steel experience, we offer a full size range and vary standard of steel pipe, OCTG&line pipe, pipe fittings and flange, valve and gasket, bolts and nuts and scaffolding products for projects around the world.

SUBSCRIBE TO OUR PRICE LIST

Please leave us product type, size, standard, quantity and necessary details for latest price. Our sales team will contact you within 24 hours.

CONTACT US

  No.1088 XinJinQiao Road,Shanghai,China
 +86 21 60530355, 60530655
    +86 21 60488433, 60488477
Copyright © Shanghai Beall Metal Co.,Limited All Rights Reserved.